Navigate
Edit DashboardAnalyze
1D Plots 2D Images Original Inputs Timing Output Warnings1D Plots
2D Images
Table of Original Inputs
All inputs used for the calculation
| Value | |
|---|---|
| Target Mag | 9.159 |
| Saturation Level (electons) | 52000.0 |
| Instrument | nirspec |
| Mode | bots |
| Aperture | s1600a1 |
| Disperser | g395h |
| Subarray | sub2048 |
| Readmode | nrsrapid |
| Filter | f290lp |
| Primary/Secondary | rp^2/r*^2 |
Timing Info
All the timing info needed for your observation. Overhead calculation assumes 30 minute target acquisition time.
APT Inputs
| Value | |
|---|---|
| Instrument | NIRSpec |
| Template | NIRSpec Bright Object Time Series |
| Subarray | SUB2048 |
| Grating/Filter | G395H/F290LP |
| Readout Pattern | NRSRAPID |
| Groups per Integration | 24 |
| Exposures/Dith | 1 |
| Integrations/Exp | 1434 |
Calculation Details
| Value | |
|---|---|
| Transit Duration (hr) | 4.488000 |
| Number of Transits | 1 |
| Transit + Baseline, No Overhead (hr) | 8.982417 |
| Observing Efficiency (%) | 92 |
| Frame Time (sec) | 0.902000 |
| Integrations In Transit | 717 |
| Integrations Out of Transit | 717 |
| Elapsed Time per Integration incl. Reset (sec) | 22.550000 |
| Science Time per Integration excl. Reset (sec) | 20.746000 |
Warnings
Pay attention to these warnings! If you do not see 'All good' written in each box, reconsider your run.
| Value | |
|---|---|
| Group Number Too Low? | All good |
| Group Number Too High? | All good |
| Non linear? | All good |
| Saturated? | All good |
| % full well high? | All good (80% < 80%) |
| Num Groups Reset? | All good |
| Minimum Integrations? | All good |
References
When publishing results based on PandExo, please cite:
Batalha, N.E., Mandell, A., Pontoppidan,K., et al., 2017, PASP, 129, 976
