Navigate
Edit DashboardAnalyze
1D Plots 2D Images Original Inputs Timing Output Warnings1D Plots
2D Images
Table of Original Inputs
All inputs used for the calculation
| Value | |
|---|---|
| Target Mag | 6.07 |
| Saturation Level (electons) | 57600.0 |
| Instrument | niriss |
| Mode | soss |
| Aperture | soss |
| Disperser | gr700xd |
| Subarray | sub60stripe_soss |
| Readmode | nisrapid |
| Filter | clear |
| Primary/Secondary | rp^2/r*^2 |
Timing Info
All the timing info needed for your observation. Overhead calculation assumes 30 minute target acquisition time.
APT Inputs
| Value | |
|---|---|
| Instrument | NIRISS |
| Template | NIRISS Single Object Slitless Spectroscopy |
| Subarray | SUB60STRIPE_SOSS |
| Readout Pattern | NISRAPID |
| Groups per Integration | 5 |
| Exposures/Dith | 1 |
| Integrations/Exp | 358 |
Calculation Details
| Value | |
|---|---|
| Transit Duration (hr) | 1.823362 |
| Number of Transits | 1 |
| Transit + Baseline, No Overhead (hr) | 3.657551 |
| Observing Efficiency (%) | 1.923663 |
| Frame Time (sec) | 0.176880 |
| Integrations In Transit | 179 |
| Integrations Out of Transit | 179 |
| Number of Stripes | 34 |
| Elapsed Time per Full Multistripe Cycle incl. Reset (sec) | 36.779840 |
| Science Time per Full Multistripe Cycle excl. Reset (sec) | 24.055680 |
| Science Time per Stripe excl. Reset (sec) | 0.707520 |
Warnings
Pay attention to these warnings! If you do not see 'All good' written in each box, reconsider your run.
| Value | |
|---|---|
| Group Number Too Low? | All good |
| Group Number Too High? | All good |
| Non linear? | All good |
| Saturated? | All good |
| % full well high? | All good (76% < 80%) |
| Num Groups Reset? | All good |
| Minimum Integrations? | All good |
References
When publishing results based on PandExo, please cite:
Batalha, N.E., Mandell, A., Pontoppidan,K., et al., 2017, PASP, 129, 976
